Difference between revisions of "Cloud9 Payment Device Controller Setup"

From Cloud9 Payment Processing Gateway Documentation
Jump to: navigation, search
(iOS)
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{Template:C9Header|PDC Setup}}
 
{{Template:C9Header|PDC Setup}}
  
=Overview=
+
=Download=
{{Template:PDC}}
+
==MS Windows==
 +
* '''[http://www.cloud9paymentgateway.com/files/PDC/Win PDC for Windows]'''
  
=Supported Terminals/Pin Pads=
+
'''→Note:
*We support and sell the full line of Ingenico Telium 2 EMV and NFC compliant devices, such as Ingenico IPP320, IWL350, ISC350, etc. All future Telium 2 devices will be supported automatically.  All Terminals and Pin Pads from that line are EMV compliant and operational. See [[#Hardware Setup]] below for more info.
+
*Citrix environment requires setting the IPP320 on com port 32 (you will need to change it from the default port 96). Citrix does not scan for ports above 32.'''<br>
*Also supported are any and all MSR readers and non-EMV compliant pin pads for non-EMV transactions.
+
*If Windows Terminal Services are used , the PDC may not be on the local machine.  So the CLCAPI.INI PDC URL entry should be set up using the IP address where the PDC is running.
  
=Download=
+
==iOS==
[http://www.911software.com/files/Cloud9/PDC/C9PG-PDC-Setup-1.05.01.exe Cloud9 Payment Device Controller (PDC) V1.05.01]
+
* '''[http://cloud9paymentgateway.com/files/PDC/iOS PDC for iOS]'''
  
 
=Hardware Setup=
 
=Hardware Setup=
[[Ingenico IPP320 EMV Payment Processing Terminal Setup|Ingenico IPP320 Setup]]
+
'''If you have not done so''', run the [[Payment_Processing_EMV_Terminal_Pin_Pad_Setup|EMV Terminal Hardware Setup]]
 
 
 
 
 
 
  
...
 
<br>
 
  
 
{{Template:C9Footer|Setup}}
 
{{Template:C9Footer|Setup}}

Revision as of 22:48, 6 November 2018




Cloud9 Payment Gateway Documentation. This site can also be reached at http://docs.cloud9paymentgateway.com

Download

MS Windows

→Note:

  • Citrix environment requires setting the IPP320 on com port 32 (you will need to change it from the default port 96). Citrix does not scan for ports above 32.
  • If Windows Terminal Services are used , the PDC may not be on the local machine. So the CLCAPI.INI PDC URL entry should be set up using the IP address where the PDC is running.

iOS

Hardware Setup

If you have not done so, run the EMV Terminal Hardware Setup






From the makers of Cloud9 Payment Processing Gateway and Creditline Credit Card Processing Software